N. Florida R/C Racers United – 1st Annual Family Reunion

I get to check this off of the bucket list. I’ll be putting on my first race next weekend at Shiverville Raceway. With any luck this will be a success and I’ll do a nitro friendly event later this year.

20140119-233635.jpg

Flea Market Race

Last weekend we made the trip to RRW in Belleview, Fl. RRW is a medium-large, outdoor, clay race track. Quite suitable to run all 3 of my 4wd’s. Another great benefit to racing at RRW is that it’s located in a flea market. Perfect for entertaining the wife while I raced.

20131024-204459.jpg

Round 3

Photo Credit: Cheryl Joye-Shiver

Well I headed down to Shiverville Raceway for round 3 of the 5 race points series. I had a chance to lock up the 4×4 SC and E-Buggy classes with another TQ and win. I had some great runs with the B44.1 in the 4wd buggy class but there are several that can still take the class. Since there are 2 drops I decided to go ahead and get in on the mod SC class as well.

20131017-203257.jpg

Round 1 of qualifying went well.

In practice I had my mod SC set to blinky with a 7.5 motor. I’ve run it this way on many occasions but this time it seemed kinda slow. I added some turbo timing to it just before the race. During the warm-up it still felt sluggish. Then I discovered that my EPA was set to 80. I had turned the speed down for my nephew to run the truck at round 2 and completely forgot. I cranked it back up to 100. Lol, not a good idea. It took several laps to get used to it. I got a handle on it and qualified second.

20131017-203440.jpg

The 4wd buggy had more grip than I expected and I had several mistakes early. Again I was able to settle down and secure a second for the round.

The Tekno EB48.2 was perfect but we only had 3 show up for E-Buggy. Very disappointing but I still a good time.

20131017-221707.jpg

I was excited try a new shock setup on the Tekno 410. It’s been an amazing truck and I really haven’t changed much from the box stock setup. This truck never disappoints. It set the TQ by a full lap. Love that thing.

Round 2 went about the same.

In mod SC, I think I may have been on a TQ pace but got too anxious, carried too much speed coming out of the sweeper, and got into the back of some traffic that knocked me back into second.

The 4wd buggy was awesome this round. I ran some worn blue JConcepts Bar Codes. I was doing some tire management and saving a new set of JConcepts DD’s for the main. I won the heat but came up 4 seconds short for setting the new TQ.

Despite the low turnout I was still enjoying the track time with the EB48.2. I threw some worn blue JConcepts Stackers on for the high bite surface and set a new TQ time. The drove very smoothly and handled the tight turns easily.

20131017-202818.jpg

I made some adjustments to the droop and installed a stiffer front sway-bar in the SCT410 based on how high the traction was. I was able to push the truck even harder and bettered my round 1 TQ.

The race order changed a little bit for the mains.

First up was the 4wd buggy. I’m in the running for the points lead in this class so I really wanted the win. Early on I hung tight to the leader Daniel and felt I was a little faster in certain section. All I had to do was not lose ground where we were equal. I was able to move into the race lead several laps in and a mishap gave me a nice lead over Daniel. It looked like I had it in the bag with 25 seconds to go. Then I rolled and had to sit and watch Daniel pass me as I laid on my roof. With only a lap to go there was nothing I could do. It was a great race that I wish I could do over.

20131017-203057.jpg

Next was E-Buggy. Unfortunately one of the three cars had broke in the second qual. and he was unable to fix it. This really wasn’t how I wanted to win the class so I’ll be running the last two rounds with the EB48.2 to hopefully show that I deserve it.

20131017-220232.jpg

The sun was going down and the shade started taking over the track. When track starts to cool it loses it’s traction. I stuck with my JConcepts blue Bar Codes on my SC10 and hoped the traction was still there.

I planned on learning from my mistakes and played it safe on the start of the mod SC main. It was a great start for all as we were single file through the first 3 turns. Coming into that tight sweeping 3rd turn I was still in second but was worried about 3rd and 4th place running into the back of the truck as I paced the leader, so I went wide and allowed them to pass me on the inside. By the straight-away I had moved back into 3rd. The leader caught a pipe going around the large sweeper and slowed up 2nd enough that I was able to pass them both and move into the lead. I settled in and held the lead for the race win.

20131017-203604.jpg

Last up was the 4×4 SC class. The sun was going down, the lights were on, and the whole track was in the shade. I was betting on the track being slick so I went with some JConcepts 3D’s in green. I was clear from my warm-up lap that we no longer had the traction we enjoyed all day. I was glad I changed to greens and looked forward to taking advantage of my pole position. I knew I couldn’t push the truck like I had earlier so I just tried to maintain a steady consistent pace. The second place driver, Cody, and I broke away and I was able keep a small gap between us. I held on for the win and locked up points series.

20131017-203740.jpg
I’d like to thank all of my sponsors. Tekno RC, JConcepts, Trinity, Hobbywing, Radiopost, Boys Making Noise, Boca Bearings, and Kal-Gard

20131017-220026.jpg

Catching Up……

It seems like I’m always behind with this blog now.

Two weekends ago we ran round 2 of the Shiverville Points Series. I was having a pretty good race day but I was excited about having my wife and nephew out racing in the novice class. This was actually the third time racing for both of them. I had my nephew Devon out there running my SC10 with a 17.5 motor in blinky and let Carmen run the 4×4 Slash in the 50% training mode. They both did a great job. Devon finished 3rd and Carmen came home in 5th.

20131003-162147.jpg
I was running my Tekno RC SCT410, Tekno RC EB48.2, and my Team Associated B44.1. They were flawless all day and the my JConcepts tire choices were right on for each round including the mains. If you recall they were giving raffle tickets for to the person with the fastest lap in each round/class. Well I managed to come home with 8 more raffle tickets. I’m usually just consistent and don’t have the fastest lap in a race too often so to get these has been a delight. I finished round 2 of the series with three TQ’s and three wins.

20131003-162807.jpg
I’m looking forward to round 3 on Oct. 12th. It’s a 5 race series with 2 drops. With some luck I can lock up the win in the 4×4 SC and E-Buggy classes. With a DNF in round 1 I’ll have to continue to race the B44.1. The plan is to run mod SC and mod 2wd buggy as well during this next round and transition into those classes for the remaining races.

Round 1

Well I’m still slacking on my posts. I’ve been pretty busy going through and editing the Clash footage. Plus getting ready for the Shiverville Points Series.

Shiverville Racetrack, High Springs, FL is one of the best racing environments I’ve had the pleasure of attending. So when their points series started the weekend after we returned from the JConcepts Clash, I almost had no choice but to pack the car up. This time I’d be flying solo in the Mustang which takes a little extra imagination to get everything in.

20130919-153133.jpg

20130919-153143.jpg
Shiverville is an small-medium sized outdoor clay track. Lap times pretty much range from 16-23 seconds depending on class. I decided to run all of my 4wd’s for the series, a B44.1, my Tekno RC SCT410, and my Tekno RC EB48.

20130919-152827.jpg

20130919-152918.jpg<br /

20130919-153624.jpg
There are a ton of prizes being raffled off at the end of the series. One of the special raffle is for a Novak esc/motor combo. To get tickets for this particular raffle is a little different. The driver that turns the fastest lap in a class gets a raffle ticket and a ticket is given for each round of racing.

20130919-155037.jpg
I don’t usually shoot for the fastest lap but it was a fun goal to shoot for and I managed to come away with 6 tickets.

Overall it was a great day. I TQ’d (top qualifier) all 3 classes, which gets me an extra point, and won 2. I broke in the 4wd buggy main just after I moved into the lead. Fortunately it’s the best 3 out of 5.

20130919-155419.jpg
I’ll be headed back this weekend for round 2. Some scheduling conflicts required them to put these rounds back to back. The remaining 3 rounds will be spaced over the next 3 months.

JConcepts Clash

DSC_0585

I really wanted to right this big ol’ elaborate blog about the Clash but if I stick to that mentality it’ll never get done. So this is the “express” version.

So my wife got us in very late Wednesday partially due to the extra hour we gained heading west. I got up and made my way to the track Thursday morning to claim a pit spot. I thought it was a little weird but practice wouldn’t start until about 1 o’clock so all you could do was get a good spot and wait. What I wasn’t expecting was JConcepts to make room for me under their tent. Great way to start the event.

I decided to race my Tekno RC SCT410, that has been very good to me, and my brand new Tekno RC EB48.2. This only be the second time racing the EB but I have a lot of confidence with Tekno RC.

The track was very slick to start. It was something I could handle with the SC pretty easily but the starting setup I was using on the EB was honestly terrible. It was from a setup sheet online for higher grip situations and that was not the case here. I knew something had to change so I made some camber tweaks and headed back out. Thank goodness it started to act like it should and I started to get a feel for it. Some toe changes and I was ready.

Friday was more practice in the am with a round of qualifying scheduled for a 4pm start. Both Tekno’s felt good. The plan was to just put in two safe runs. Qualifying was going to be based on qual points and your performance scored over 3 of the 4 qualifiers. That means being fast once don’t mean much. You have to be consistent. So finishing 7th overall in E-Buggy and 4th overall in 4×4 SC was a great start.

IMG_5602 IMG_5603

 

Saturday was three rounds of qualifying. The E-Buggy class was nuts. It was the biggest class and just full of talent. Watching them go around was amazing. I still didn’t quite feel used to the EB48.2 quite yet. I had been driving a Tekno converted Mugen MBX-6 prior. So this felt like going from a Caddy to a Porsche. Despite that my performance netted me a 8th place position in the A-Main.

The SCT410 was great like always. I finished Saturday with two 2nds and a 1st that put me number 2 in the A-Main behind JR Mitch.

IMG_5618 IMG_5619

 

Sunday was triple A-Mains meant consistency was going to pay off again. E-Buggy A1-Main was first and what a great way to start. Sneaking through a pile up after the start and picking the JConcepts tires to start the day, gave me a 3rd place finish.

I was feeling good going into A1 of the 4×4 SC mains. The Tekno was great again and I finish in second behind JR.

Unfortunately bad luck and mistakes knocked me out of a podium finish in E-Buggy but I’m still proud of my 7th place overall finish. 4×4 SC was close but I finish A2 and A3 with a 2nd and a 1st to secure a 2nd place overall.

DSC_0739-crop

 

This was my second JConcepts Clash and it doesn’t disappoint. A great facility and great racers make this one of the best races of the year.

IMG_5620